настройки

🔧 Before printing: Always check Z-offset and bed calibration. A good first layer is 90% of success!

🎨 For PLA: Nozzle 200-220°C, bed 50-60°C, fan 100%. Print without enclosure.

🔩 For PETG: Nozzle 230-250°C, bed 70-80°C, fan 20-40%. Better to disable fan.

⚡ For ABS: Enclosed chamber required! Nozzle 240-260°C, bed 90-110°C, fan 0%.

🕸️ Stringing: Reduce temperature, increase retraction, dry filament.

📏 Dimensional accuracy: Use calibration cube for Flow and PA (Pressure Advance) tuning.

🔧 FlashStudio | Reference & Cheat Sheet